Kramer Electronics Ltd.
UHD Matrix Switcher
– Protocol 3000
77
MTX-MODE
Set/get to auto-switch mode
VMUTE
Set/get video on output status
ROUTE
Set/get layer routing
MTX-MODE
Functions
Permission
Transparency
Set:
MTX-MODE
End User
Public
Get:
MTX-MODE?
End User
Public
Description
Syntax
Set:
Set auto-switch mode
#MTX-MODE
SP
output_id,mode
CR
Get :
Get auto-switch mode
#MTX-MODE?
SP
output_id
CR
Response
~
nn
@MTX-MODE
SP
output_id,mode
CR
Parameters
output_id
–
1
(OUT 1),
2
(OUT 2),
3
(OUT 3),
4
(OUT 4),
5
(OUT 5),
6
(OUT 6),
7
(OUT 7),
8
(OUT 8)
mode
–
0
(Manual),
1
(Auto priority)
2
(Auto last connected)
Response Triggers
After execution, a response is sent to the com port from which the Set/Get was received.
After execution, a response is sent to all com ports if
MTX-MODE
was set by any other external control device
(button press, WEB, device menu and similar).
Notes
Not recommended for new devices.
K-Config Example
Set output to last connected:
“#MTX
-
MODE 1,2”,0x0D
ROUTE
Functions
Permission
Transparency
Set:
ROUTE
End User
Public
Get:
ROUTE?
End User
Public
Description
Syntax
Set:
Set layer routing
#
ROUTE
SP
layer,dest,src
CR
Get:
Get layer routing
#
ROUTE?
SP
layer,dest
CR
Response
~
nn
@ROUTE
SP
layer,dest,src
CR LF
Parameters
layer
–
1
(Video),
2
(Audio)
dest
–
1
(HDMI OUT 1),
2
(HDMI OUT 2),
3
(HDMI OUT 3),
4
(HDMI OUT 4),
5
(HDMI OUT 5),
6
(HDMI OUT 6),
7
(HDMI OUT 7),
8
(HDMI OUT 8),
*
(All outputs)
src
–
1
(HDMI IN 1),
2
(HDMI IN 2),
3
(HDMI IN 3),
4
(HDMI IN 4),
5
(HDMI IN 5),
6
(HDMI IN 6),
7
(HDMI IN 7),
8
(HDMI IN 8),
0
(Output disconnected)
Notes
The get command identifies input switching on Step-in clients.
The set command is for remote input switching on Step-in clients (essentially via the web).
K-Config Examples
Route video HDMI IN 2 to video HDMI OUT 8:
“#ROUTE 1,8,2”,0x0D