![background image](http://html.mh-extra.com/html/kramer/vs-48uhd/vs-48uhd_user-manual_2001379027.webp)
Kramer Electronics Ltd.
UHD Matrix Switcher
– Operating VS-88UHD via Front Panel Buttons
25
2. Press one or more input buttons to change their status.
The
LOCK
button flashes.
3. Press
LOCK
to save changes and exit the HDCP mode.
Copying the EDID
You can copy the EDID to an input from a connected output or use the default EDID.
To copy the EDID from a connected output:
1. Press and hold
EDID
and
STO
until both buttons illuminate.
VS-88UHD
enters the EDID mode and the 7-segment display shows the current EDID
status:
On the front panel button:
Both input and output buttons are dark.
On the 7-segment display:
“
d
” under an output number indicates that the input port is set to the default EDID.
“
L
” under an output number indicates that the EDID was uploaded externally from a file
via Web page.
A digit under an output number indicates the output from which the EDID was copied.
2. Press one or more input buttons (or
ALL
).
The 7-segment display LEDs of the selected inputs flash.
3. Press the output button (with a connected display) corresponding to the output from
which you want to copy the EDID.
4. Press
EDID
.
Wait for about 5 seconds for the device to copy the EDID from the connected display.
To copy the default EDID:
1. Press and hold
EDID
and
STO
until both buttons illuminate.
VS-88UHD
enters the EDID mode and the 7-segment display shows the current EDID
status.
2. Press one or more input buttons (or
ALL
).
The 7-segment display LEDs of the selected inputs flash.
3. Press a disconnected output button.
4. Press
EDID
.
Wait for about 5 seconds for the device to copy the default EDID to the selected inputs.