background image

 

 
 
 

KRAMER ELECTRONICS, LTD. 

2. SPECIFICATIONS 

 

VS-3000 

Function 

Master Programmable Remote Controller 

Input / Outputs 

2 x RS-232 DB-9 in/out connectors 
1 x RS-485 connector on detachable terminal blocks 
9 pole, remote dry-contact connector on detachable terminal blocks 
18 pole, keyboard extension connector on detachable terminal blocks 

Setting Memory 

8 immediate setups for fast access and retrieval 

Control 

Front panel keys, RS-232, RS-485, contact closure switches, external 
keyboard 

Weight 

1.7 kg. (3.8 lbs.) Approx. 

Dimensions       (W x D x H) 

19 " x 2 " x 2U,  (48 cm x 5 cm x 9 cm) 

Power Source 

12 VDC, 400 mA. 

 
 

3. 

HOW DO I GET STARTED? 

The fastest way to get started is to take your time and do everything right the first time. Taking 15 
minutes to read this manual may save you a few hours later. You don’t even have to read the whole 
manual. At the beginning of each section, you’ll find an overview of the section. If the section doesn’t 
apply to you, you don’t have to spend your time reading it. 

4. 

UNPACKING AND CONTENTS

 

The items contained in your Kramer Controller package are listed below. Please save the original box 
and packaging materials for possible future shipment of the Controller. 
 

 

Controller 

 

12 V DC power supply (wall transformer).  

 

User Manual 

 

DB-9 to DB-25 or DB-9 to DB-9 Serial Null-Modem Adapter 

 

A Concise Directory of KRAMER Products 

4.1 

Optional Accessories  

The following accessories, which are available from Kramer, can enhance implementation of your 
Controller. For information regarding cables and additional accessories, contact your Kramer dealer. 

 

VA-50P – 

to connect the 

VS-3000

 to the mains supply.

 

This is a six-outlet power supply 

designed to operate Kramer products, which normally uses an external 12VDC power 
transformer.  This includes all units in the VM-50, VS-55

and

 

VM-3

 

families

,

 the Kramer 

TOOLS and Pico TOOLS families, most of the TP series of twisted pair converters, and others. 
By replacing up to six wall transformers, the 

VA-50P

 can save valuable space on power strips. 

It can be installed in a rack using the model 

RK-50R

 kit, which holds two 

VA-50P

s and 

requires two vertical spaces in a standard 19” rack.  For non-rack applications, special brackets 
are provided which allow multiple 

VA-50

s to be stacked safely. The 

VA-50P

 is dependable, 

rugged, and can also provide clean 12VDC power to non-Kramer devices up to a total supply 
current of 600 milliamps, provided that the polarity is correct (positive = center pin). 

 

VP-14

 – adds more RS-232 ports. This unique product is designed to distribute RS-232 

commands transmitted by a touch screen control system, personal computer, or other control 
system. It allows the user to control up to three compatible devices when just one serial port or 
RS-232 card is available.  There are four 9-pin ports, any of which can receive incoming RS-
232.  The incoming commands are then distributed to the remaining ports.  An extensive set of 
DIP switches allows the unit to be configured for use with crossed or straight (uncrossed) 
cables. The 

VP-14

 was designed specifically for use with Kramer switchers and routers, but 

can be easily adapted for use with any other equipment, which uses RS-232 in null-modem 

Summary of Contents for VS-3000























Reviews: