13
KRAMER ELECTRONICS, LTD.
Please, wait…
The controller takes about 20 seconds to erase the memory. Then a new message appears
Ready for receiving
START TRANSMISSION FROM PC
On the PC, click SEND. This key on the PC display changes to red, and numbers will
run along the blue line. The following message appears on the LCD display on the
controller
TRANSFER MAY TAKE MINUTES
Please, wait…
Watch both the computer and the controller displays. After about 30-40 seconds the program
finishes its installation, the red light and running numbers disappear and the controller displays
the message
Program replaced
successfully !
This message displays for about 3 seconds, after that it will be replaced with
: CONTROLLER setup
: list of MACHINEs
This stage is over. The old program is replaced successfully. You are in SETUP and you can
restore your old setup or prepare a new one (see SETUP explanation). Re-connect switchers to
back panel.
8.5 ERROR
MESSAGES
Interpretation
Keyboard ERROR
One or more keys (excluding ENTER) on the front
please, RELEASE the keys
panel are pushed for more than 1 sec
Check if a heavy object is lying on the keyboard!
EXTERNAL keyboard ERROR
As above, but for extended keys or short-circuit between
please, RELEASE the keys
connection wires.
Check
connections
on
rear
panel
Communication ERROR
Communication between the controller
The UNIT does not respond
and the unit failed
See more in SETUP – list of MACHINEs
List of machines is empty
This message appears when first turning on or after
run controller SETUP
deleting all machines from the list.
Push and hold down the ENTER key for about 3-4 sec, run
SETUP, and install at least one machine
This NUMBER already exists
Trying to install a second machine using the same
number as
enter ANOTHER number
of a machine which is already installed. It is possible to have
several machines of the same model in one system, but each
must have a unique machine number.
UNIT changed STATUS
Loaded SETUP
from front panel of machine.
please, restore display
Press ENTER to restore new status of machine