8
KRAMER ELECTRONICS, LTD.
- The following keystrokes are permitted:
ALL – OFF
clear all OUTPUTS of the current setup
OFF – ALL
the same as ALL – OFF
ALL – In 1/16
assigns all OUTs to the entered IN
OFF – Out 1/16
clears the entered OUTPUT
VIDEO -
Click to see the VIDEO contents of the current switcher. For switchers with
breakaway, enter the BREAKAWAY mode
AUDIO -
Click to see the AUDIO contents of the current switcher. For switchers with breakaway,
enter the BREAKAWAY mode
AfV -
For switchers with the breakaway option, click to enter the AUDIO-follow-VIDEO
mode
- Interpretations of front-panel led indications:
VIDEO and AUDIO unlit
Switcher with control functions (eg. VS-4228)
VIDEO lit, AUDIO unlit
Video-only switcher or BREAKAWAY mode –
LCD displays video status
VIDEO unlit, AUDIO lit
Audio-only switcher or BREAKAWAY mode –
LCD displays audio status
VIDEO and AUDIO lit
Video and audio switcher in AUDIO-follow-
VIDEO mode – LCD displays both video and audio
status
LOAD SETUP
Fast access keys for retrieving SETUPs stored in non-volatile
(1 – 8)
memory in the
switcher. If a switcher has more than eight setups, access to the remainder of the
setups is possible via the MENU functions
DIRECTION
In
REGULAR
(working)
mode
:
keys -
UP/DOWN – scroll over the list of the ON-LINE machines (the machines which
were installed in the “SETUP” procedure)
-
LEFT/RIGHT- not used for switchers with less than 16 inputs and outputs. For
switchers with more than 16 inputs and / or outputs, these buttons may be used to
scroll over the range of INs and OUTs (in steps of 8).
In
SETUP mode
:
- UP/DOWN – scroll over the list of all the possible machines that may be installed
and controlled with the VS-3000.
LEFT/RIGHT- scroll over all the possible machine numbers (1–15).
Each installed machine must have its own UNIQUE number, which is set within
the machine itself. This same number must be entered in the SETUP procedure
for the VS-3000.
ENTER
-
To enter the
MENU
in regular mode
– click
ENTER.
- To enter the next item in the MENU –
click
ENTER
again.
- To enter
SETUP
–
push and hold
ENTER
for 3 – 4 sec.
- To
UPDATE
the VS-3000 firmware
– push and hold
ENTER
while
turning on
the VS-3000.
When the controller is in the CONFIRM mode (green LEDs on), click ENTER to
complete the current step of an operation.
Whenever a green LED flashes, it is
necessary to click ENTER now or later to complete the operation.
