Kramer VP-771, User Manual

Page: 14 / 77

VP
-77
1 –
O
ver
vi
ew
9
Figure 2: VP-771 Presentation Switcher/Scaler Rear Panel
# Feature Function
18 AUDIO IN
Unbalanced
Connectors
HDMI 3.5mm Mini Jack Connect to an unbalanced audio source for audio takeover of the HDMI 1 and HDMI 2 embedded audio
(see Section 6.3 )
19 PC 3.5mm Mini Jack Connect to the unbalanced audio of the computer graphics source (from 1 to 2)
20 DP 3.5mm Mini Jack Connect to the unbalanced audio source for analog audio takeover of the DisplayPort embedded audio (see
Section 6.3 )
21 CV (L, R) RCA Connect to the unbalanced stereo audio of the composite video source (from 1 to 2)
22 S/PDIF IN RCA Connect to the digital audio source of the component video (Y, Pb, Pr)
23 MIC IN 3.5mm Mini Jack Connect to a microphone
24 COND/DYN MIC DIP-switch Select between a condenser and a dynamic type microphone
25 S/PDIF OUT RCA Connector Connect to a digital audio acceptor
26 LINE OUT (L, R) Terminal Block Connector Connect to the L and R unbalanced stereo audio acceptor
27 REMOTE IR 3.5mm Mini Jack (opening)
Covered by a cap. The 3.5mm connector at
the end of the internal IR connection cable
fits through this opening
Connects to an external IR receiver unit for controlling the machine via an IR remote controller (instead of
using the front panel IR receiver)
Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the machine (only if
the internal IR connection cable has been installed) , see Section 8.5.1
28 ETHERNET RESET Button Press while turning power off and then on, to reset the Ethernet settings to their factory default state
29 SPKR Terminal Block Connector Connect to a balanced stereo audio acceptor (speakers)
30
VIDEO INPUT
Connectors
HDMI Connect to the HDMI source (from 1 to 2)
31 PC 15-pin HD Connect to the computer graphics source (from 1 to 2)
32 Y RCA
Connect all three connectors to the component video source 33 Pb RCA
34 Pr RCA
35 CV RCA Connect to the composite video source (from 1 to 2)