Kramer VP-771, User Manual

Page: 26 / 77

VP-771 - The OSD Menu 21
21
The display mode setup, shown in Figure 6 , is part of the entire system control and
the selected Single Window also shows the current aspect ratio (Best Fit):
Figure 6: Select the Display Mode
6.2.1 Window Customization
Window customization lets you change the size and position of a selected window.
Make sure that you have control over the window that requires customization (Main
Window Control or PiP Window Control). If not, select it via the OSD item in the
Miscellaneous menu, see
Section 6.8 .
Note that if the
VP-771
is set to the single window display mode, only the Main Window control
applies. If the
VP-771
is set to any of the dual window display modes, you have to select
Main/PiP window control to move and/or resize the selected window.
In the following examples, PiP Window Control is selected, but the same procedure
applies to Main Window Control.
6.2.1.1 Changing the Size of the Main and/or PiP Window
Use the H Width and V Height to change the size of the window using the + and –
buttons on the front panel or remote control transmitter (as illustrated in
Figure 7 ).