![background image](http://html1.mh-extra.com/html/kramer/vp-704sc/vp-704sc_user-manual_2001758005.webp)
Kramer Electronics Ltd.
5
3
HOW DO I GET STARTED?
The fastest way to get started is to take your time and do everything right the first time. Taking 15 minutes to
read the manual may save you a few hours later. You don’t even have to read the whole manual - if a certain
section doesn’t apply to you, you don’t have to spend your time reading it.
4
UNPACKING AND CONTENTS
The items contained in your Kramer accessory package are listed below. Please save the original box and
packaging materials for possible future transportation and shipment of the unit.
Scan Converter
AC Power Cable
VGA Input Cable
Composite Video Output Cable
S-Video Output Cable
75 OhmTermination BNC Plug (VP-705SC and VP-706SC Only)
Infrared Remote Control Unit
Rackmount Screws (Qty 4) for EIA 19” Racks
User Manual
Kramer Concise CD ROM Product Catalog
4.1
Optional Accessories
The following optional accessories, which are available from Kramer, can enhance implementation of your Scan
Converter. For information regarding these accessories, contact your Kramer dealer.
RGB Output Cable Assembly – 4 or 5 BNC Type
YUV Output Cable Assembly – 3 BNC Type
RS-232 Cable
BNC Computer Input Adapter – HD15 to 5 BNCs
5
CONNECTING THE HARDWARE
The first step is to connect the Scan Converter and related hardware. Below is a drawing of the rear panel.
(The VP-704SC does not have the GL IN and GL OUT connectors.)
B
B-Y
VS
G
Y
HS
CS
R
R-Y
CV
SV OUT
OUTPUTS
VGA OUT
VGA IN
RS232
POWER
100-240V 50-60HZ
GL
IN
GL
OUT
o
5.1
Rack Mounting
Each of the Scan Converters described in this manual mount in a standard 19” (1RU) EIA rack assembly. These
devices do not require spacing above or below the unit for ventilation. Four standard rackmounting screws are
provided for each of the four corner holes in the rack ears.
5.2 Connecting the Scan Converter to a Computer and Monitor
Disconnect the computer monitor’s input cable from the computer’s VGA output connection. Connect this cable
to the 'VGA OUT' connector on the back of the Scan Converter. Macintosh computers that do not have an
HD15 type output connector may require an additional adapter. Next, use the VGA cable supplied to connect
the VGA output connection from the computer to the ‘VGA IN’ connector on the back of the Scan Converter.
After these connections are made and the computer and monitor are switched on, you will see the computer’s
output displayed on the computer monitor as before, even when there is no power to the Scan Converter.
5.3 Connecting the Video Outputs
The Scan Converter provides several different output types to allow connection to various video displays and
other equipment. The choice of output type depends on what your equipment can accept.