USB-RS
USB-RS CONVERTER FOR PROGRAMMING SATEL DEVICES
usb-rs_en 10/14
The USB-RS converter makes it possible to connect to the computer the SATEL devices
provided with the following port:
RS-232 – PIN5 or RJ type connector,
RS-232 (TTL) – PIN3 or RJ type connector.
It also allows you to program the SATEL radio controllers.
The converter is delivered with a USB cable.
Note: The converter does not allow programming of the CA-64 control panels.
1. Description of USB-RS converter
Fig. 1. USB-RS converter.
4 cables terminated with appropriate plugs; the light ones are to be connected to the
RS-232 port, the brown ones – to be connected to the RS-232 (TTL) port.
3
LEDs:
– blinking indicates data transmission to the module (TX output),
– blinking indicates data reception from the module (RX input),
– steady light indicates the presence of power.
USB type B socket for connecting the converter to the computer.
