![background image](http://html1.mh-extra.com/html/kramer/vp-4x8ak/vp-4x8ak_user-manual_2001252030.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling via the Embedded Web Pages
26
9
Controlling via the Embedded Web Pages
You can remotely operate the
VP-4x8AK
using a Web browser via the
Ethernet connection (see
Section 9.1
). To be able to do so, you must use a
supported Web browser; Microsoft (V6.0 and higher), Chrome, or Firefox
(V3.0 and higher).
To check that Java is installed correctly and running, browse to:
http://www.java.com/en/download/help/testvm.xml
This page runs a test and displays a Java success (see
Figure 15
) or failure
message.
Figure 15: Java Test Page Success Message
If you do not see the success message, follow the instructions on the page to:
•
Load and enable Java
•
Enable Javascript in your browser
9.1
Connecting to the VP-4x8AK via your Browser
Make sure that your PC is connected via a network to the
VP-4x8AK
and do
the following:
1. Open your Internet browser.
2. Enter the unit’s IP number
1
or name in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
Figure 16: Entering the IP Number in the Address Bar
1 The default IP number is 192.168.1.39, and may be changed by the system integrator