![background image](http://html1.mh-extra.com/html/kramer/vp-4x8ak/vp-4x8ak_user-manual_2001252025.webp)
Operating the VP-4x8AK
21
21
Figure 12
shows an example of the display immediately after switching on
the power. This display disappears after a few seconds, replaced by the
normal display.
Firmware
version #
Machine #
Figure 12: 7-segment Display after Turning the Switcher ON
7.2.2 The REL AUDIO LEVEL 7-Segment Display
The REL AUDIO LEVEL display, as illustrated in
Figure 13
, is active only in
the AUDIO and AFV modes (see
Section 7.7
).
Figure 13: REL AUDIO LEVEL 7-segment Display
7.3
Confirming Settings
You can choose to work in the At Once or the Confirm mode.
In the At Once mode (TAKE button does not illuminate):
•
Pressing an
OUT-IN combination implements the switch immediately
•
You save time as execution is immediate and actions require no user
confirmation
•
No protection is offered to allow the correction of an erroneous action before
it is implemented
In the Confirm mode (TAKE button illuminates):
•
You can key-in several actions and then confirm them by pressing the TAKE
button, to simultaneously activate the multiple switches
•
Every action requires user confirmation, protecting against erroneous
switching
•
Execution is delayed
1
until the user confirms the action
1 Failure to press the TAKE button within 40 seconds (the Timeout) will abort the action