4
SP-1G - Overview
Switching audio between three separate non-synchronous SDI inputs even if the
standards of these signals differ, as long as they belong to the same group.
More specifically, the
SP-1G
features:
•
Cross standard conversion
•
Image scaling
•
Two SDI inputs and outputs
•
One dedicated SDI genlock input and one analog genlock input with LOOP
output
•
Clean Switching video (glitch-free switching) and Soft Switching audio
functions
•
Automatic standard detection
•
TBC operation with continuous, uninterrupted syncs on the output, even
when there is an input glitch
•
An audio embedder/de-embedder that handles 16 audio channels
simultaneously
•
A built-in test signal generator that provides special video test signals as well
as a 1kHz (–18dBFS) audio sine wave for all 16 SDI audio channels (all 4
groups simultaneously)
•
A two-line, 16-character per line LCD display that shows the status of the
device while in the main mode of operation
•
Nine front panel buttons to control operation of the device
•
One RS-232 port for controlling the
SP-1G
from a serial remote control
device or a PC