10
SP-1G - Operating the SP-1G
5.2
Using the Front Panel Buttons
The front panel includes the following buttons:
IN1, IN2
,
MENU, ENTER, ►,▲,▼,◄
. Pressing any arrow button once advances
or returns one parameter. Pressing and holding an arrow button scrolls
automatically through the menus or parameters. The following table explains their
functions.
Button
Function
IN 1
Selects SDI INPUT 1
IN 2
Select SDI INPUT 2
MENU
1. Opens the top level MENU from the MAIN mode of operation.
2. Closes the top level MENU and returns to the MAIN mode of operation.
3. Closes the SUBMENU and returns to the top level MENU.
ENTER
1. Fixes a new value of the adjusted parameter (but does not save it).
2. Opens a SUBMENU from the top level MENU.
3. Accelerates the repeat function 16 times, if this button is pressed together
with LEFT or RIGHT buttons.
UP
▲
Selects the previous item of any menu. Optionally this button can be used
for additional selecting of SDI genlock input as video input besides IN1 and
IN2. This optional function can be turned ON in special item (last item) of
top menu: “SDI Genl Input as Video: Enable or Disable”, (see
Section 6.12
)
DOWN
▼
Selects the next item of any menu
LEFT
◄
Selects the previous value of a selected parameter (with repeat function)
RIGHT
►
Selects the next value of a selected parameter (with repeat function)
PANEL
LOCK
Enables or disables the PANEL LOCK function after pressing for 2 sec