SP-1G - Using the SP-1G Menus
17
6.5.1
Setting the Image Size from the Video Signal Menu
To set the horizontal image size:
•
Press
▼ or ▲ until SET1 SDTV input H size, (or in the case of an HDTV
input SET1 HDTV input H size appears), press
◄ to decrease the horizontal
image size in 1% steps and
► to increase the size by the same amount
•
Press ENTER to save the setting temporarily (until powered down)
•
Save the new size settings using the Saving Setups procedure (see
Section 6.2
)
To set the vertical image size:
•
Press
▼ or ▲ until SET1 SDTV input V size, (or in the case of an HDTV
input SET1 HDTV input V size appears), press
◄ to decrease the image
size in 1% steps and
► to increase the size by the same amount
•
Press ENTER to save the setting temporarily (until powered down)
•
Save the new Size settings using the Saving Setups procedure (see
Section 6.2
)
6.5.2
Setting an Image Position from the Video Signal Menu
To set the horizontal image position (for both SDTV and HDTV inputs):
•
Press
▼ or ▲ until SET1 Horizontal Position appears, press ◄ to shift
horizontally the image to the left in 0.2% steps and
► to shift to the right by
the same amount
•
Press ENTER to save the setting temporarily (until powered down)
•
Save the new position settings using the Saving Setups procedure (see
Section 6.2
)
To set the vertical image position (for both SDTV and HDTV inputs):
•
Press
▼ or ▲ until SET1 Vertical Position appears, press ◄ to shift
vertically the image to the top of the screen in 0.2% steps and
► to shift
downwards by the same amount