![background image](http://html.mh-extra.com/html/kramer/sp-1g/sp-1g_user-manual_2002026012.webp)
SP-1G - Operating the SP-1G
9
5
Operating the SP-1G
This section explains how to use the:
•
LCD display (see
Section 5.1
)
•
Front panel buttons (see
Section 5.2
)
5.1
Using the LCD Display
The
SP-1G
includes a two-line, 16-character per line LCD display that displays
(while in the main mode of operation) the device status, the genlock reference
source and standard of video signals on SDI outputs. The following examples
explain what is shown on the display.
1. When the genlock mode is turned OFF, the display shows:
SET3 INT.XTAL REF.
FrcSTD: 1080p/60
This means the setup (preset) number is 3; the internal crystal generator
XTAL is used as the genlock reference source, the standard of output
signals on outputs is forced to 1080p/60.
2. If the genlock is turned ON and a reference input signal was selected as
dedicated input SDI GenlockIN, the display shows:
SET3 Ref: GnlSDI
FrcSTD: 1080p/60
3. If the output standard selection mode is AUTO, the display shows:
SET3 Ref: GnlSDI
AutSTD: 1080p/60
4. If genlock is turned ON and Analog Genlock Input was selected as the
reference input signal, the display shows:
SET3 Ref: GnlAnl
AutSTD: 1080p/60