![background image](http://html.mh-extra.com/html/kramer/sp-1g/sp-1g_user-manual_2002026028.webp)
SP-1G - Kramer Protocol 2000
25
Global Parameters (D and E values in decimal) for Supported Commands (I value in decimal)
Parameter
D
E
Comments
7 – 1080i/60
8 – 1080p/23
9 – 1080p/24
10 – 1080p/25
11 – 1080p/29
12 – 1080p/30
13 – 1080p/50
14 – 1080p/59
15 – 1080p/60
16 – 1080sf/23
17 – 1080sf/24
18 – 1080sf/25
19 – 1080sf/29
20 – 1080sf/30
21 – Unidentified signal
22 – No input signal
IN1-IN2 Standard
Status
9
0 – 22
E values and standards same as above
(read only)
Genlock SDI Input
Status
10
0 – 22
E values and standards same as above
(read only)
Analog Genl Input
Status
11
0 – 22
E values and standards same as above
(read only)
Genlock Status
15
E = 0 – 2
Read only
0 – No reference signal
1 – Loss of lock to reference
2 – Proper lock to reference
One-Byte Local Parameters
Parameter
D
E
Comments
Forced Standard
64
0 – 20
(May be used as input forced standard
and as output forced standard. See two
next items – "Input Standard Mode" and
"Output Standard Mode")
0 – 480i/60
1 – 576i/50
2 – 720p/50
3 – 720p/59
4 – 720p/60
5 – 1080i/50
6 – 1080i59
7 – 1080i/60
8 – 1080p/23
9 – 1080p/24
10 – 1080p/25
11 – 1080p/29
12 – 1080p/30
13 – 1080p/50
14 – 1080p/59
15 – 1080p/60
16 – 1080sf/23
17 – 1080sf/24
18 – 1080sf/25
19 – 1080sf/29
20 – 1080sf/30
Input Standard Mode
65
E = 0 – 1
0 – Auto identified standard using
appropriate input signal (on each channel
separately) (default)
1 – Forced input standard defined in
previous item
Output Standard Mode
66
E = 0 – 1
0 – (Default) auto identified standard,
based on signal that has been
preselected as reference genlock source.
(This source can be selected between
either dedicated genlock SDI input or
Analog input, see parameter D = 71 –
genlock reference source). If genlock is
turned off, forced standard is used