6
SP-1G - Overview
#
Feature
Function
6
◄ Left Arrow Button
Selects the previous value of a selected
parameter (with repeat function)
▼ Down Arrow Button
Selects the next item of any menu
▲ Up Arrow Button
Selects the previous item of any menu. Optionally
this button can select an SDI genlock input as
video input besides IN1 and IN2. This function
can be turned ON in the last item of the “SDI
GenlockIN as Video: Enable or Disable” menu,
(See
Section 6.12
)
► Right Arrow Button
Selects the next value of selected parameter (with
repeat function)
7
LOCK
Button
Press for 2 seconds to enable or disable the panel
LOCK function
8
Analog
Genlock
IN
BNC Connector
Connects to analog genlock reference source,
auto standard identification is available
9
TERM
Pushbutton
Press if no additional device is attached,
release if another device is attached
10
LOOP
BNC
Connector
Connects the analog genlock signal to another
device
11
SDI Genlock
IN
BNC Connector
Connects to an SDI genlock reference source. It
can also be used as third video input, (see
Section 6.12
). Auto standard identification is
available
12
OUT
BNC Connector Connects to an SDI genlock acceptor
13
SDI Inputs
IN 1
BNC Connector Connects to SDI source 1
14
IN 2
BNC Connector Connects to SDI source 2
15
SDI Outputs
OUT 1
BNC
Connector
Connects to SDI acceptor 1
16
OUT 2
BNC
Connector
Connects to SDI acceptor 2
17
RS-232
9-pin D-sub Port
Connects to a PC or the remote controller
18
5V DC
Power Connector
Connect to the supplied 5V DC power adapter