SP-1G - Connecting the SP-1G 3G HD-SDI Synchronizer
7
4
Connecting the SP-1G
3G HD-SDI
Synchronizer
To connect the
SP-1G
as shown in the example in
Figure 2
:
1. Connect up to two SDI input sources (for example, a video camera and SDI
VTR) to the IN 1 or IN 2 BNC connectors.
2. Connect the OUT 1 and OUT 2 BNC connectors to up to 2 SDI output
acceptors (for example, a non-linear editor).
3. To get the genlock function, connect an analog genlock reference source to
the ANALOG GENLOCK IN BNC connector or an SDI genlock reference
source to the SDI GENLOCK IN BNC connector.
4. If required, connect a controlling computer to the RS-232 9-pin D-sub
connector (see
Section 4.1
).
Figure 2: Connecting the SP-1G 3G HD-SDI Synchronizer