![background image](http://html1.mh-extra.com/html/kramer/afm-20dsp/afm-20dsp_user-manual_2001092041.webp)
Kramer Electronics Ltd.
AFM-20DSP
– Processing Audio Signals
39
3. To set the cross-point volume, use the knob, or enter the value and click
Enter
. The
cross-point volume is set and shows at the cross-point.
Figure 41: Cross-Point Volume Value
Linking Analog Pairs
To link analog input or output pairs, see
Linking Analog Inputs and Outputs
Setting Amplifier Outputs
To set the amplifier left and right outputs, use Matrix or DSP, see
).
To set amplifier outputs:
1. In the Navigation List, click
Matrix
.
2. Click
AMP
(on the lower right side of the page). The AMP page opens and displays all
available outputs.
Figure 42: AMP View
3. Select an output to route to Amp 1 (amplifier left side) and to Amp 2 (amplifier right side).
the button turns green and shows the status as ON.
Figure 43: Selecting Outputs to Amplifier
Amplifier outputs are defined.