Kramer AFM-20DSP, User Manual

Page: 24 / 90

Kramer Electronics Ltd.
AFM-20DSP
– Processing Audio Signals
22
Processing Audio Signals
Use the DSP page to process the input and output signals and present an overall view of your
session, including analog and digital in-out connections (in the Matrix area), using pre-matrix
and post-matrix modules.
In general:
•
Click the Matrix area to enter the Matrix page (see Routing Inputs to Outputs
on page 37 ).
•
Click an input, output, or any module to open its process view and configure that item.
The DSP page enables users to do these actions:
•
Selecting Output Signals to Route to Amplifier Outputs on page 22 .
•
Linking Analog Inputs and Outputs on page 23 .
•
Processing a Signal on page 24 .
Selecting Output Signals to Route to Amplifier Outputs
Select the audio outputs to duplicate and output to the amplified speakers .
To duplicate the audio outputs to the amplifier:
1. From the Navigation List, click DSP .
2. In Duplicate to Amplifier Output 1 click the down arrow, and select an output. For
example, OUT 19.
Figure 17: DSP Page
– Selecting Left Amplifier Output Signal
13