Kramer Electronics Ltd.
AFM-20DSP
– Protocol 3000
74
Function
Description
Syntax
Parameters/Attributes
Example
NET-MASK?
Get subnet mask.
COMMAND
#NET-MASK?
<CR>
FEEDBACK
~nn@NET-MASK
net_mask
<CR><LF>
net_mask
– Format: xxx.xxx.xxx.xxx
Get the subnet mask:
#NET-MASK?
<CR>
PASS
Set password for login
level.
The default
password is an empty
string.
COMMAND
#PASS
login_level
,
password
<CR>
FEEDBACK
~nn@PASS
login_level
,
password
<CR><LF>
login_level
– Level of login to set
(End User or Administrator).
password
– Password for the
login_level
. Up to 15 printable ASCII
chars
Set the password for the Admin
protocol permission level to
33333:
#PASS
Admin
,
33333
<CR>
PASS?
Get password for login
level.
The default
password is an empty
string.
COMMAND
#PASS?
login_level
<CR>
FEEDBACK
~nn@PASS
login_level
,
password
<CR><LF>
login_level
– Level of login to set
(End User or Administrator).
password
– Password for the
login_level
. Up to 15 printable ASCII
chars
Get the password for the
Admin protocol permission
level:
#PASS?
Admin
<CR>
PORTS-LIST?
Get the port list of this
machine.
The response is
returned in one line
and terminated with
<CR><LF>.
The response format
lists port IDs separated
by commas.
This is an Extended
Protocol 3000
command.
COMMAND
#PORTS-LIST?
<CR>
FEEDBACK
~nn@PORTS-LIST
[<direction_type>
.
<port_type>
.
<port_index
>
,..,
]
<CR><LF>
The following attributes comprise the
port ID:
▪
<direction_type>
–
o
IN
o
OUT
▪
<port_type>
–
o
HDMI
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
SPDIF
o
MIC
o
DANTE
▪
<port_index>
– The port number
as printed on the front or rear
panel
Get the ports list:
#PORTS-LIST?
<CR>
PROT-VER?
Get device protocol
version.
COMMAND
#PROT-VER?
<CR>
FEEDBACK
~nn@PROT-VER
3000:version
<CR><LF>
version
– XX.XX where X is a decimal
digit
Get the device protocol
version:
#PROT-VER?
<CR>
RESET
Reset device.
To avoid locking
the port due to a USB
bug in Windows,
disconnect USB
connections
immediately after
running this command.
If the port was locked,
disconnect and
reconnect the cable to
reopen the port.
COMMAND
#RESET
<CR>
FEEDBACK
~nn@RESET
OK
<CR><LF>
Reset the device:
#RESET
<CR>
SECUR
Start/stop security.
The permission
system works only if
security is enabled
with the “SECUR”
command.
COMMAND
#SECUR
security_mode
<CR>
FEEDBACK
~nn@SECUR
security_mode
<CR><LF>
security_mode
–
0
– OFF (disables security)
1
– ON (enables security)
Enable the permission system:
#SECUR
0
<CR>
SECUR?
Get current security
state.
The permission
system works only if
security is enabled
with the “SECUR”
command.
COMMAND
#SECUR?
<CR>
FEEDBACK
~nn@SECUR
security_mode
<CR><LF>
security_mode
–
0
– OFF (disables security)
1
– ON (enables security)
Get current security state:
#SECUR?
<CR>
SIGNAL?
Get input signal status.
COMMAND
#SIGNAL?
inp_id
<CR>
FEEDBACK
~nn@SIGNAL
inp_id
,
status
<CR><LF>
inp_id
– Input number
1
– HDMI
status
– Signal status according to
signal validation:
0
– Off
1
– On
Get the input signal lock status
of IN 1:
#SIGNAL?
1
<CR>
SIGNALS-LIST?
Get signal ID list of this
machine.
The response is
returned in one line
and terminated with
<CR><LF>.
The response format
lists signal IDs
separated by commas.
This is an Extended
Protocol 3000
command.
COMMAND
#SIGNALS-LIST?
<CR>
FEEDBACK
~nn@SIGNALS-LIST
[<direction_type>
.
<port_type>
.
<port_ind
ex>
.
<signal_type>
.
<index>
,..,
]
<CR><LF>
The following attributes comprise the
signal ID:
▪
<direction_type>
–
o
IN
o
OUT
▪
<port_type>
–
o
HDMI
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
SPDIF
o
MIC
o
DANTE
▪
<port_index>
– The port number
as printed on the front or rear
panel
▪
<signal_type>
–
o
AUDIO
o
VIDEO
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type
Get signal ID list:
#SIGNALS-LIST?
<CR>
SN?
Get device serial
number.
COMMAND
#SN?
<CR>
FEEDBACK
~nn@SN
serial_number
<CR><LF>
serial_number
– 14 decimal digits,
factory assigned
Get the device serial number:
#SN?
<CR>
