Kramer Electronics Ltd.
AFM-20DSP
– Protocol 3000
78
Function
Description
Syntax
Parameters/Attributes
Example
X-MIC-TYPE
Set microphone type.
This is an
Extended Protocol
3000 command.
COMMAND
#X-MIC-TYPE
<direction_type>
.
<port_type>
.
<port_index>
,
mi
c_type
<CR>
FEEDBACK
~nn@X-MIC-TYPE
<direction_type>
.
<port_type>
.
<port_index>
,
mic_type
<CR><LF>
The following attributes comprise the
port ID:
▪
<direction_type>
–
o
IN
▪
<port_type>
–
o
MIC
▪
<port_index>
– The port number
as printed on the front or rear
panel and according to IO Config.
1 (Mic 1) to 16 (Mic 16)
mic_type
– Dynamic/Condenser (not
case sensitive)
Set MIC 3 type to condenser:
#X-MIC-TYPE
IN
.
MIC
.
3
,
co
ndenser
<CR>
X-MIC-TYPE?
Get microphone type.
This is an
Extended Protocol
3000 command.
COMMAND
#X-MIC-TYPE?
<direction_type>
.
<port_type>
.
<port_index>
<C
R>
FEEDBACK
~nn@X-MIC-TYPE
<direction_type>
.
<port_type>
.
<port_index>
,
mic_type
<CR><LF>
The following attributes comprise the
port ID:
▪
<direction_type>
–
o
IN
▪
<port_type>
–
o
MIC
▪
<port_index>
– The port number
as printed on the front or rear
panel and according to IO Config.
1 (Mic 1) to 16 (Mic 16)
mic_type
– Dynamic/Condenser (not
case sensitive)
Get MIC 3 type:
#X-MIC-TYPE?
IN
.
MIC
.
3
<CR>
X-MIX-LVL
Set DSP matrix cross-
point MIX level in dB.
This is an
Extended Protocol
3000 command.
COMMAND
#X-MIX-LVL
OUT
.
<port_type>
.
<port_index>
.
<signal_type>
.
<i
ndex>
,
IN
.
<port_type>
.
<port_index>
.
<signal_type>
.
<index>
,dB
<CR>
FEEDBACK
~nn@X-MIX-LVL
OUT
.
<port_type>
.
<port_index>
.
<signal_type>
.
<index>
,
IN
.
<port_type>
.
<port_index>
.
<signal_type>
.
<ind
ex>,dB
<CR><LF>
The following attributes comprise the
primary signal ID (suffix 1) and follower
signal ID (suffix 2 or greater):
▪
<direction_type>
– IN
o
IN
o
OUT
▪
<port_type>
–
o
HDMI
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
DANTE
o
SPDIF
o
MIC
▪
<port_index>
– The port number
as printed on the front or rear
panel
▪
<signal_type>
–
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type
Set analog audio 13 and Dante
1 cross-point level to -25.2dB:
#X-MIX-LVL
OUT.ANALOG_A
UDIO.13.AUDIO.1,IN.DANT
E.1.AUDIO.1,-25.2
<CR>
X-MIX-LVL?
Get DSP matrix cross-
point MIX level in dB.
This is an
Extended Protocol
3000 command.
COMMAND
#X-MIX-LVL?
OUT
.
<port_type>
.
<port_index>
.
<signal_type>
.
<
index>
,
IN
.
<port_type>
.
<port_index>
.
<signal_type>
.
<index
<CR>
FEEDBACK
~nn@X-MIX-LVL
OUT
.
<port_type>
.
<port_index>
.
<signal_type>
.
<index>
,
IN
.
<port_type>
.
<port_index>
.
<signal_type>
.
<ind
ex>,dB
<CR><LF>
The following attributes comprise the
primary signal ID (suffix 1) and follower
signal ID (suffix 2 or greater):
▪
<direction_type>
– IN
o
IN
o
OUT
▪
<port_type>
–
o
HDMI
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
DANTE
o
SPDIF
o
MIC
▪
<port_index>
– The port number
as printed on the front or rear
panel
▪
<signal_type>
–
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type
Get analog audio 13 and Dante
1 cross-point level:
#X-MIX-LVL?
OUT.ANALOG_
AUDIO.13.AUDIO.1,IN.DAN
TE.1.AUDIO.1
<CR>
X-MIX-MUTE
Set DSP matrix cross-
point mute state.
This is an
Extended Protocol
3000 command.
COMMAND
#X-MIX-MUTE
OUT
.
<port_type>
.
<port_index>
.
<signal_type>
.
<
index>
,
IN
.
<port_type>
.
<port_index>
.
<signal_type>
.
<index
>,dB
<CR>
FEEDBACK
~nn@X-MIX-MUTE
OUT
.
<port_type>
.
<port_index>
.
<signal_type
>
.
<index>
,
IN
.
<port_type>
.
<port_index>
.
<signal_type>
.
<in
dex>,<mute_state>
<CR><LF>
The following attributes comprise the
primary signal ID (suffix 1) and follower
signal ID (suffix 2 or greater):
▪
<direction_type>
– IN
o
IN
o
OUT
▪
<port_type>
–
o
HDMI
o
ANALOG_AUDIO
o
AMPLIFIED_AUDIO
o
DANTE
o
SPDIF
o
MIC
▪
<port_index>
– The port number
as printed on the front or rear
panel
▪
<signal_type>
–
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type
▪
<mute_state>
–
o
ON
o
OFF
Mute analog audio 13 and
Dante 1 cross-point:
#X-MIX-MUTE
OUT.ANALOG_
AUDIO.13.AUDIO.1,IN.DAN
TE.1.AUDIO.1,ON
<CR>