![background image](http://html1.mh-extra.com/html/kramer/afm-20dsp/afm-20dsp_user-manual_2001092042.webp)
Kramer Electronics Ltd.
AFM-20DSP
– Processing Audio Signals
40
Setting USB/SPDIF Selectable Ports Inputs and Outputs
This section is for
AFM-20DSP-AEC
only.
In
Digital Inputs
and
Digital Outputs
, users can set the port to route digital USB or SPDIF
inputs and outputs. The USB/SPDIF port is a selectable port with two signals (right and left).
Note
– USB is the default for inputs and outputs.
To set the USB/SPDIF input:
1. In the Navigation List, click
DSP
.
2. Below
Digital Inputs
, select
USB 1.1
. The USB 1.1 window opens.
3. In the drop-down box, select either USB.B or SPDIF. In this screenshot, SPDIF is
selected.
Figure 44: Digital Input routing set to SPDIF
Note - This selection automatically changes both the right and left signal to SPDIF:
Figure 45: Digital input selectable port set to SPDIF (right and left)
4. Do these actions:
▪
Move the volume fader to set the input audio level (both sliders are identical).
▪
To mute / unmute the output audio, click
/
.