Doc: ELE16PH33A
Page 1
Solar Solve Marine
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
for
for
for
for
CASSETTE and
CASSETTE and
CASSETTE and
CASSETTE and
NON
NON
NON
NON----CAS
CAS
CAS
CASS
S
S
SETTE
ETTE
ETTE
ETTE
ELECTRIC SCREENS and BLINDS
ELECTRIC SCREENS and BLINDS
ELECTRIC SCREENS and BLINDS
ELECTRIC SCREENS and BLINDS
SOLASAFE
SOLASAFE
SOLASAFE
SOLASAFE
®
®
®
®
CASSLITE
CASSLITE
CASSLITE
CASSLITE
®
®
®
®
SOLAROLA
SOLAROLA
SOLAROLA
SOLAROLA
®
®
®
®
DIMMLITE
DIMMLITE
DIMMLITE
DIMMLITE
®
®
®
®
We reserve the right to make any modifications necessary to ensure products comply with customer requirements.
The drawings in these documents are for illustrative purposes and NOT TO SCALE.
Care and Maintenance
Under normal circumstances dusting with a
NON-ABRASIVE
dry duster is all that is required. Finger
prints, grease and most stubborn marks on film, blackout, lyverscreen and fibreglass fabrics can be
carefully removed with white spirit and a soft cloth, followed by a further wiping over with a soft non-
abrasive cloth dipped in clean soapy water. If any type of film or fabric becomes very dirty it can be
carefully wiped over with a soft non-abrasive cloth and clean water with a little soap or detergent. This
will do no harm as long as the film / fabric is allowed to dry completely before being rolled up. Excess
water should be removed as it will leave a water mark when dry.
PLEASE NOTE:
IF WINDOWS ARE SLOPING IT
WILL BE NECESSARY TO USE THE
CABLE SUPPORT SYSTEM
IMPORTANT NOTE FOR INSTALLER:
PLEASE LEAVE THIS INSTRUCTION
SHEET WITH THE ROLLER SCREEN /
BLIND FOR CUSTOMERS REFERENCE
ONLY A FULLY QUALIFIED ELECTRICIAN SHOULD INSTALL MOTORISED
SCREENS / BLINDS FOR HEALTH & SAFETY REASONS AND TO
MAINTAIN A FULLY VALID WARRANTY
