Kramer Electronics Ltd.
AFM-20DSP
– Processing Audio Signals
24
Processing a Signal
Use processing view to configure the selected audio signal. Access processing view by
clicking an input / output button or a filtering tool in the DSP session view.
Note - Different port types have different processing modules.
In general:
•
To enable a module click
(on). To disable a module, click
(off).
•
In the processing view, the module appears at the center and input/output volume sliders
appear to the left/right (for further information, see
Input / Output Channels Operation
•
Adjust configuration knob by clicking and holding the mouse then moving it up or down,
or enter the parameter value below the knob and press
Enter
on your keyboard to apply.
•
Reset a configuration knob to its default parameter value, by clicking the mouse within
the knob area while pressing
Ctrl
on your keyboard.
•
The parameter value always appears below the knob or slider.
•
A selected input or output button appears with a white rim.
•
A selected processing tool button appears with a distinctive color.
•
An enabled processing tool button appears with a distinctively coloured rim.
Processing modules enable users to do these actions:
•
Adjusting Analog Input Parameters
•
Adjusting Digital Input Parameters
•
•
•
Using HPF (High Pass Filter) Module
•
Using AFS (Auto Feedback Suppression) Module
•
•
•
•
Using Post Matrix Equalizer Module
•
•