Kostal ENECTOR Operating Manual Download Page 80

Page: 80 / 96

Operation

Optional: Select charging mode via KOSTAL Smart Energy Meter or optional push-
button.
-

Power Mode

(simple charging)

Solar Pure Mode

(solar charging)

Solar Plus Mode

(solar-optimised charging)

NOTE

The charging mode cannot be selected.

If the wallbox has been set to

Lock Mode

via the KOSTAL Smart Energy Meter, no other

mode can be selected via the optional push-button.

■

Wallbox can only be enabled via the KSEM.

✔

Vehicle is being charged.

Ending charging process

End the charging process via the electric vehicle or via the KOSTAL Smart Energy
Meter online interface.

Remove the charging cable from the vehicle by the plug.

NOTE

Damage to the charging cable
Tensile stress on the charging cable may result in cable breakage and other damage.
Only remove the charging cable from the electric vehicle using the plug.

Put on the protective cap.

Hang up the charging cable without kinks.

✔

Charging process completed.

Summary of Contents for ENECTOR

































































































Search results

Summary of Contents for ENECTOR

Reviews:

Brands by name

Popular brands

Kostal ENECTOR, Operating Manual

Search results

Summary of Contents for ENECTOR

Reviews:

Brands by name

Popular brands