Setting up wallbox in the KSEM
© 2022 KOSTAL Solar Electric GmbH
75
7.2 Setting up ENECTOR with convenience
functions in the KSEM
Setting up the wallbox with convenience functions in the KSEM provides a wide range of
additional options. With a PV system, functions such as
Solar Pure Mode
or
Solar Plus
Mode
are possible. These can be selected as a function via the KSEM interface or using
the KOSTAL Solar App. An activation code is required to set up the wallbox in the KSEM.
NOTE
In order for the wallbox to be set up in the KOSTAL Smart Energy Meter (KSEM), this
function must first be activated via an activation code in the KSEM.
The activation code can be purchased from the KOSTAL Solar online shop.
To access the shop, go to
shop.kostal-solar-electric.com.
The following must be done to set up the wallbox with convenience functions in the KSEM:
■
Buy activation code from the online KOSTAL shop.
■
Enter activation code in the
Activation code
menu. The new
Wallbox
menu then ap-
pears.
■
Add ENECTOR in the
Wallbox
menu.
■
Activate data transfer to the KOSTAL Solar Portal in the KSEM.
■
Assign the KSEM to a system as a device in the KOSTAL Solar Portal.
Buying activation code from the online KOSTAL shop
1.
The link
shop.kostal-solar-electric.com
will take you to the online KOSTAL Solar
shop.
2.
You can purchase a code to activate the wallbox in the KSEM under "Activation
code".
Entering activation code in KOSTAL Smart Energy Meter
The activation code is entered via the KSEM user interface.
1.
Log in to the KSEM on the user interface.
2.
Go to
Activation code
.
3.
Enter and confirm the 10-digit activation code for the wallbox.
➔
The new
Wallbox
menu appears.
✔
Activation is complete.
