background image

4

Introduction

Main features

Revolutionary synthesis technology

The WAVEDRUM generates sound by detecting the 
sound of your strike via the head and rim sensors, and 
processing this audio source by DSP (Digital Signal Pro-
cessing) sound synthesis technology to create unique 
sounds. At the same time, a PCM sound source is also 
played using your strike as the trigger.
Using this combination of methods, the WAVEDRUM 
produces a rich variety of percussion sounds that give 
you an extremely wide range of freedom for perfor-
mance expression. By using subtle motions of your fin-
gers or hand to strike, rub, or scratch the WAVEDRUM, 
or by playing it using sticks, mallets, or brushes, you can 
obtain a high degree of expressive and dynamic range 
that rivals that of acoustic drums or percussion instru-
ments.

Unique sounds generated by 36 different algorithms

The WAVEDRUM uses DSP technology to carry out a 
variety of software synthesis methods including analog, 
additive, non-linear, and physical modeling, and com-
bines these sounds to create the final output sound. Such 
combinations are called “algorithms,” and the WAVE-
DRUM contains 36 different single-size and double-size 
algorithms. By specifying different algorithms you can 
create completely new sounds that can be produced only 
by the WAVEDRUM, as well as a variety of instrumental 
sounds or sounds of nature.

200 different PCM instruments for head and rim

 

The PCM instruments (PCM sound sources produce a 

rich variety of sounds in addition to the algorithms. Pro-
grams that use a single-size algorithm allow you to 
freely assign a different algorithm and PCM instrument 
to the head and the rim, giving you a very broad array of 
sounds. Programs that use a double-size algorithm are 
optimized for simulating acoustic instruments such as a 
snare, djembe, or cajon; within the algorithm, these pro-
grams analyze your performance in realtime, and based 
on this analysis control the PCM instrument to create 
natural response that cannot be obtained from a conven-
tional PCM sound generator.

100 preset programs, 100 user programs

There are 100 built-in preset programs that combine per-
cussion, drums, and sound effects in complex ways that 
can produce completely different sounds according to 
your playing technique. Programs that you edit can be 
saved in the 100 user programs.

Live mode

You can register twelve frequently-used programs (four 
programs x three banks) in buttons 1–4 for immediate 
recall. This is convenient for live performances.

100 loop phrases

The built-in 100 loop phrases cover a broad range of 
genres and tempos, allowing you to play along for a one-
person jam session.

AUX IN connector

 

The AUX IN connector lets you connect another WAVE-

DRUM unit, an audio device, or an external sound module, 
and play along with that audio source.

Lightweight and compact design 

The WAVEDRUM features a lightweight and compact 
design for comfortable playing on your lap as well as 
easy portability. You can also perform with it attached to 
a stand (sold separately) for stand-up performance (Per-
cussion Stand ST-WD) or a commercially-available 
snare stand.

Summary of Contents for Wavedrum

































Reviews: