Kontron Carrier Grade Server TIGW1U
December 2009
Product Guide, rev. 1.3
35
Server Installations and Upgrades—TIGW1U server
The two channels support registered DDR2-533 and DDR2-667 FBDIMM memory
(stacked or unstacked). Peak theoretical memory data bandwidth is 6.4 Gbytes/s with
DDR2-533 or 8.0 Gbytes/s with DDR2-667.
Table 4
and
Table 5
show the maximum memory configurations supported using the
specified memory technology.
3.4.2.1
DIMM Population Rules
DIMM population rules depend on the operating mode of the memory controller, which
is determined by the number of DIMMs installed. DIMM pairs are populated in the
following DIMM slot order: A1 and B1, A2 and B2, A3 and B3.
DIMMs within a given pair must be identical with respect to size, speed, and
organization, but DIMM capacities can be different between different DIMM pairs. For
example, a valid mixed DIMM configuration may have 512 Mbyte DIMMs installed in
DIMM slots A1 and B1, and 1 Gbyte DIMMs installed in DIMM slots A2 and B2. Single
DIMM operation is supported with the DIMM populated in slot A1 only, but populating in
pairs is recommended.
3.4.2.2
Supported DIMM Configurations
Supported DIMM configurations for this server board are shown in
Table 6
.
Table 4.
Maximum 6 DIMM System Memory Configuration - x8 Single Rank
DRAM Technology x8 Single Rank
Maximum Capacity
256 Mbit
1.5 Gbytes
512 Mbit
3 Gbytes
1024 Mbit
6 Gbytes
2048 Mbit
12 Gbytes
Table 5.
Maximum 6 DIMM System Memory Configuration - x4 Dual Rank
DRAM Technology x4 Dual Rank
Maximum Capacity
256 Mbit
6 Gbytes
512 Mbit
12 Gbytes
1024 Mbit
24 Gbytes
2048 Mbit
48 Gbytes
Table 6.
FBDIMM Population Options
Channel 0
Channel 1
Sparing
Possible
DIMMA1
DIMMA2
DIMMA3
DIMMB1
DIMMB2
DIMMB3
NO
NO
YES
NO
= Slot is populated.
= Slot is not populated.