Kontron ePCI-101, User Manual, Page: 71 / 109

4-18
ePCI-101 User’s Guide
4.1.2.7.1 Boot
Feature Options Description
Hard Drive
Bootable Add-in Cards
Primary Master
Removable Devices
Legacy Floppy Drives
Hard Drive
Bootable Add-in Cards
*
ATAPI CD-ROM Drive
Network Boot
Keys used to view or configure devices:
<Enter>
expands or collapses devices with a
+
or
–
<Ctrl+Enter>
expands all
<Shift + 1>
enables or disables a device
<+>
or
<->
moves the device up or down
<n>
May move removable device between Hard Disk or
Removable Disk
<d> Remove a device that is not installed.
* Note: The hard drives and SCSI drives detected will be
listed in this section and the first drive in the list will be
the boot drive.
4.1.2.7.2 Exit Menu Selection
Feature Options Description
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Saves Changes
Yes / No
Yes / No
Yes / No
Yes / No
Yes / No
Exit Saving Changes
Set up and save your changes to CMOS.
Exit Discarding Changes
Exit utility without saving Setup data to CMOS.
Load Setup Defaults
Exit utility without saving Setup data to CMOS.
Load Setup Defaults
Load default values for all Setup items.
Discard Changes
Load previous values from CMOS for all Setup items.
Save Changes
Save Setup Data to CMOS.
4.1.2.8 Boot Utilities
Phoenix Boot Utilities are : Phoenix QuietBoot™
Phoenix
MultiBoot™
Phoenix QuietBoot displays a graphic illustration rather than the traditional POST messages while
keeping you informed of diagnostic problems.
Phoenix MultiBoot is a boot screen that displays a selection of boot devices from which you can
boot your operating system.