Kontron ePCI-101, User Manual, Page: 32 / 109

2-9
ePCI-101 User’s Guide
2.3.4 USB2-3 and USB4-5(J5 & J10)
If the USB port connector on the faceplate is insufficient, a USB header is available for additional
USB port connectors. Connect the two-port USB connector to the USB header and mount the USB
bracket to an open slot in the chassis.
Signal Paths:
J5 & J10 (USB header for two ports)
Bios Settings:
To enable/disable the USB Host controller, refer to Section Advanced Menu selection , USB control
Sub-Menu.
To support USB keyboard, refer to Section Advanced Menu selection , USB BIOS Legacy Support.
Pin Signal USB 2 & 4 Pin Signal USB 3 & 5
1 VCC 2 VCC
3 DATA- 4 DATA-
5 DATA+ 6 DATA+
7 GND 8 GND
9 Shield Ground 10 Shield Ground