Kontron ePCI-101, User Manual, Page: 64 / 109

4-11
ePCI-101 User’s Guide
4.1.2.5.2.3 USB Control
Feature Options Description
USB Device 29,
function 0 & 1& 2
Enabled
Disabled
Enable or Disable all USB functions by setting item to desired
value.
USB Device 29,
function 1 & 2
Enabled
Disabled
Enable or Disable these two USB functions by setting item to
desired value.
USB Device 29,
function 2 Enabled
Disabled
Enable or Disable this USB function by setting item to desired
value.
USB Device 29,
function 7
Enabled
Disabled
Control USB 2.0 functionality through this item.
4.1.2.5.3 On-board Device Configuration
You can make the following selections on the On-board Device Sub-Menu.
Feature Options Description
Serial Port A
Enabled
Disabled
Auto
Configure serial port A.
Base I/O
address
3F8
2F8
3E8
2E8
Select the base I/O address for serial port A.
Interrupt
IRQ 3
IRQ 4
Set the interrupt for serial port A.
Serial Port B
Enabled
Disabled
Auto
Configure serial port B.
Base I/O
address
3F8
2F8
3E8
2E8
Select the base I/O address for serial port B.
Interrupt
IRQ 3
IRQ 4
Set the interrupt for serial port B.
Mode
RS-422
RS-485
RS-422 Set the mode for serial port B.
Parallel port
Disabled
Enabled
Auto
Configure parallel port.
Mode
Output only
Bi-directional
EPP
ECP
Set the mode for parallel port.
Base I/O
address
378
278
3BC
Select the base I/O address for parallel port.
Interrupt
IRQ 5
IRQ 7
Set the interrupt for parallel port.
Floppy disk
controller
Disabled
Enabled
Auto
Configure floppy disk controller.