Kontron ePCI-101, User Manual, Page: 101 / 109

F-6
ePCI-101 User’s Guide
Code Beeps For Boot Block in Flash ROM
80h Initialize the chipset
81h Initialize the bridge
82h Initialize the CPU
83h Initialize system timer
84h Initialize system I/O
85h Check force recovery boot
86h Checksum BIOS ROM
87h Go to BIOS
88h Set Huge Segment
89h Initialize Multi Processor
8Ah Initialize OEM special code
8Bh Initialize PIC and DMA
8Ch Initialize Memory type
8Dh Initialize Memory size
8Eh Shadow Boot Block
8Fh System memory test
90h Initialize interrupt vectors
91h Initialize Run Time Clock
92h Initialize video
93h Initialize System Management Mode
94h 1 Output one beep before boot
95h Boot to Mini DOS
96h Clear Huge Segment
97h Boot to Full DOS
A0h Test SIO Clock Validity
A2h Check TEST# Jumper for POST to COM, see Extension Registers.
B0h Reset System for Erratas, Hyper-Threading
B1h Early Boot Block Initialize completed.