Phoenix BIOS
CP605
Page 5 - 32
© 2004 Kontron Modular Computers GmbH
ID 25095, Rev. 07
2509
5.07.UG.VC.041005/14230
4
5.6
The Exit Menu
Selecting "Exit" from the menu bar displays this menu:
Figure 5-19: Exit Menu — Screen Display
Table 5-17: System Info Options
FEATURE
OPTIONS
DESCRIPTION
System Slot
Yes
No
Displays whether the board is in a system slot or not.
CPCI Geographic
Addressing
N/A
Displays the slot in which the card is placed starting on the left
side with address 0.
Board Version
N/A
This is a display only field, which reflects the value of an
onboard register. This must always correspond with the CPU
on which the BIOS is installed.
Hardware Index
N/A
This is a display only field, which reflects the value of an
onboard register. It shows the index of the hardware.
Logic Index
N/A
This is a display only field, which reflects the value of an
onboard register. It shows the index of the onboard logic.
When the Board Index is 00 this item is not displayed.
EKS Number
EKS Index
Serial Number
N/A
This is a display only field, which shows Kontron internal infor-
mation about the board. EKS number and EKS index refer to
the production number and version respectively. The serial
number is unique to each board produced by Kontron. It could
be used also by the customer to identify specific boards.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Exit System Setup and
save your changes to
CMOS.
F1 Help
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
Select Menu Enter Select Sub-Menu F10 Save and Exit
