CP605
Phoenix BIOS
ID 25095, Rev. 07
© 2004 Kontron Modular Computers GmbH
Page 5 - 29
2509
5.07.UG.VC.041005/14230
4
5.5.3
Temperature Management
Figure 5-16: Temperature Management — Screen Display
Table 5-14: Watchdog Settings Options
FEATURE
OPTIONS
DESCRIPTION
IRQ5 routing
Disabled
Watchdog
Derate Signal
Enum Signal
Fail Signal
Reserve resource 280h and IRQ5 for watchdog, der-
ate, Enum or Fail signal. Fail signal from the power
supply. Enum signal is generated by a hot swap com-
patible board after insertion and prior to removal. Der-
ate signal indicates that the power supply is beginning
to derate its power output.
Watchdog mode
Disabled
NMI
Reset
Cascade (NMI + Reset)
Watchdog routing to NMI, NMI + Reset or Reset
WDT Active Time
125ms, 250 ms, 500ms,
1s, 2s, 4s, 8s, 16s, 32s,
64s, 128s, 256s
Select the time after which the action selected occurs,
if the watchdog timer is not retriggered.
Active for boot
Disabled
Enabled
Select Enable if the watchdog timer requires to be
started before the operating system is booted from the
BIOS.
Fail Signal
Disabled
NMI
Fail signal from the power supply. If this signal is to
used inside an application, it may be routed to NMI
here.
PhoenixBIOS Setup Utility
OEM Features
Temperature Management
Item Specific Help
P4 Automatic Thermal Monitor [Disabled]
Auto Thermal Throttling: [Enabled]
Temperature: [90°C/194°F]
CPU Performance: [50%]
P4 Term Trip [135°C/275 F]
F1 Help
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
Select Menu Enter Select Sub-Menu F10 Save and Exit
