CP605
Introduction
ID 25095, Rev. 07
© 2004 Kontron Modular Computers GmbH
Page 1 - 11
2509
5.07.UG.VC.041005/141
15
3
1.6
Technical Specifications
Table 1-2: CP605 4HP Version Main Specifications
CP605
SPECIFICATIONS
PROCESSOR AND MEMOR
Y
CPU
The CP605 supports one or the other of the following Intel processor types:
Pentium
4 Processor
• Up to 2.4 GHz
• 512 kB L2 on-die cache
• 400 and 533 MHz PSB
• 478-pin FC-PGA2 package
Mobile Pentium
4 Processor-M
• Up to 2.2 or higher GHz
• 512 kB L2 on-die cache
• 400 and 533 MHz PSB
• Supports SpeedStep
®
II for low power mode
• 478-pin µFCPGA package
Memory
Main memory:
• Up to 1 GB soldered DDR SDRAM memory
• Up to 1 GB of additional memory capacity via a 200-pin SODIMM socket
• Memory frequency: 200 MHz or 266 MHz
Flash memory:
• Two Firmware Hub Flash memory
• 1 MB FWH for BIOS
• 1 MB FWH extension for OS or user
EEPROM:
• Two 256 byte EEPROMs for storing CMOS data when operating without
battery
• Two 256 byte EEPROM's for user purposes
CHIPSET
Intel 845GV Chipset
82845GV Graphics Memory Controller Hub (GMCH):
• Support for a single Pentium 4 microprocessor
• 64-bit AGTL/AGTL+ based System Bus interface at 400 MHz and 533 MHz
• 64-bit System Memory interface with optimized support for DDR SDRAM
memory at 200 MHz or 266 MHz
• Integrated 2D and 3D Graphics Engines with 200 MHz core frequency
• Integrated H/W Motion Compensation Engine
• Integrated 350 MHz DAC
• Integrated Digital Video Out Port
• AGP 1X/2X/4X Controller
