CP605
Configuration
ID 25095, Rev. 07
© 2004 Kontron Modular Computers GmbH
Page 4 - 3
2509
5.07.UG.VC.041005/14220
9
4.
Configuration
4.1
Jumper Description
4.1.1
Processor Configuration
The CP605 supports all Intel Pentium 4 and Mobile Pentium 4 Processor-M processors. Due
to the different core voltages of the two processors the onboard DC/DC converter must be con-
figured via jumper J8.
4.1.2
CompactFlash Configuration
The default setting is indicated by using italic bold.
4.1.3
Dual BIOS Configuration
Dual BIOS means that there are two chips for the BIOS on the CP605 board (BIOS Flash and
the User Flash). One chip is intended to provide a backup in the event that the other gets cor-
rupted. These chips are soldered to the board.
If the primary BIOS is corrupted due to physical damage or a faulty flash upgrade, the solder
jumper J6 should be set and the system switched over to the secondary chip and booted with
default settings.
Table 4-1: Processor Configuration
J8
PROCESSOR TYPE
Open
Pentium 4 support
Closed
Pentium 4-M support
Note ...
If the jumper setting is incorrect, the board will not function.
Table 4-2: CompactFlash Configuration
J100 or R72
DESCRIPTION
Closed
Configured for slave
Open
Configured for master
Table 4-3: Dual BIOS Configuration
J6
DESCRIPTION
Open
Normal boot from the on-board BIOS
Closed
Boot from the second BIOS chip
