CP605
Introduction
ID 25095, Rev. 07
© 2004 Kontron Modular Computers GmbH
Page 1 - 13
2509
5.07.UG.VC.041005/141
15
3
EXTERNAL INTERF
A
C
ES
Gigabit Ethernet
Two 10/100/1000 MB/s Gigabit Ethernet interfaces based on the Intel 82540EM
(Kenai-32) Ethernet PCI bus controller.
• Two RJ45 connectors on the front panel
• Support for two Gigabit Ethernet channels on packet switching backplane
(PICMG
2.16, R1.0 compliant)
• Any given channel may only be operated at one or the other of the above
interfacing points
• Automatic mode recognition
• Automatic cabling configuration recognition
Cabling requirement: Category 5, UTP, four-pair cabling
Fast Ethernet
One 10Base-T/100Base-TX Fast Ethernet port integrated within the ICH4
controller (82559-style):
• One RJ45 connector on the front panel
• Support for one channel of rear I/O interfacing
• May only be operated at one or the other of the above interfacing points
• Automatic mode recognition
Cabling requirement: Category 5, UTP, two-pair cabling.
INTERNA
L INTERF
ACES
VGA Interface
Built-in Intel 3D Graphics accelerator for enhanced graphics performance.
• Supports resolutions of up to 2048 x 1536 by 16 bit at 60 Hz refresh rate
• Hardware motion compensation for software MPEG2 and MPEG4 decoding
• Flexible allocation of video memory up to 64 MB
• 15-pin D-sub VGA CRT-display connector with analog video signals
Keyboard and Mouse
Super I/O support for a keyboard and a mouse:
• Rear I/O interfacing for both keyboard and mouse
• Separate onboard keyboard connector (5-pin), requires adaptor to connect
regular keyboard
Mass Storage
EIDE Ultra ATA/100/66/33
• Two interfaces
• Up to four devices (hard disks or CD-ROMs)
• 40-pin, 2.54 mm, male pin row connector (standard)
• Optional 44-pin, 2.0 mm, male pin row connector for mounting a 2.5" disk
drive onboard.
CompactFlash:
• CompactFlash type II socket (true IDE mode)
• Supports type I and II CompactFlash cards and Microdrive
Table 1-2: CP605 4HP Version Main Specifications (cont’d)
CP605
SPECIFICATIONS
