CP605
Rear I/O Module CP-RIO6-05
ID 25095, Rev. 07
© 2004 Kontron Modular Computers GmbH
Page A - 11
2509
5.07.UG.VC.041005/14253
9
A.6.4.2
Serial Port Connectors CON14 and CON13 Pinout
The pinout of the 9-pin D-sub connectors CON14 (COM1) and CON13 (COM3) depends on
the configuration.
A.6.5
Fast Ethernet Interfaces
The selection of rear I/O or baseboard front panel Fast Ethernet ports is made via the BIOS
setup.
Figure A-8: Ethernet/Fast Ethernet Connectors
The Ethernet connector is realized as an RJ45 twisted-pair connector. The In-
terface provides automatic detection and switching between 10Base-T and
100Base-TX data transmission.
Table A-6: Serial Port Connectors CON14 (COM1) and CON13 (COM3) Pinout
PIN
RS232
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RIN
Note ...
To ensure the proper functioning of the rear I/O serial interfaces, the line driv-
ers for COM1 and COM2 port on the CP605 must be disabled. See chapter
5.5.4 Front-Rear I/O for details).
8
1
