D R A F T — F O R I N
T E R N A L U S E O N L Y
90
www.kontron.com
User Guide
CP3004-SA
Figure 30: 8 HP CP3004-SA with CP3004-XMC Module
The following chapters provide information regarding installation aspects of peripheral devices.
11.4.1 SATA Flash Module Installation
A SATA Flash module may be connected to the 4 HP CP3004-SA via the onboard connector J12.
This optionally available module must be physically installed on the CP3004-SA prior to installation of
the CP3004-SA in a system. During installation it is necessary to ensure that the SATA Flash module is
properly seated in the onboard connector J12, i.e. the pins are aligned correctly and not bent.
Note:
Only qualified SATA Flash modules from Kontron are authorized for use with the CP3004-
SA. Failure to comply with the above will void the warranty and may result in damage to
the board or the system.
Note:
The SATA Flash module cannot be used in conjunction with the Smart Extension Module,
the CP3004-HDD module, and the CP3004-XMC module.
CP3004-XMC
Module
CFast Card
XMC Module
(optional)
XMC
Con.
