D R A F T — F O R I N
T E R N A L U S E O N L Y
101
www.kontron.com
User Guide
CP3004-SA
12.2.3 Security Setup Menu
The Security Setup menu provides information about the passwords and functions for specifying the
security settings. The passwords are case-sensitive. The CP3004-SA provides no factory-set passwords.
Note:
If there is already a password installed, the system asks for this first. To clear a password,
simply enter nothing and acknowledge by pressing <RETURN>. To set a password, enter it
twice and acknowledge by pressing <RETURN>.
12.2.3.1 Remember the Password
It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords may
lead to being completely locked out of the system.
If the system cannot be booted because neither the User Password nor the Administrator Password are
known, refer to the section 3.1, for information about clearing the uEFI BIOS settings, or contact Kon-
tron for further assistance.
Note:
The HDD User Password cannot be cleared using the above method.
12.2.4 Boot Setup Menu
The Boot Setup menu provides sub-screens and functions for boot configuration and shows the boot
device priority order, which is dynamically generated.
Table 58: Security Setup Menu Functions
FUNCTION
DESCRIPTION
Password Description
Read-only field.
Administrator Password
Sets, changes or clears the Administrator Password.
To set a password, enter it twice and acknowledge by pressing Return.
User Password
Sets, changes or clears the User Password.
To set a password, enter it twice and acknowledge by pressing Return.
HDD Security Configuration
Allows access to set, modify and clear the Harddisk User Password.
The Harddisk User Password must be set to enable haddisk security
Table 59: Modes of Security
SETTING
DESCRIPTION
No password is set
Booting the system as well as entering the Setup is unsecured.
Only Administrator pass-
word is set
Booting the system is unsecured.
For entering the Setup, the Administrator password is required.
Only User password is set The password is required for booting the system as well as for entering the Setup menu.
On every startup, the user will be asked for the password.
Both User and Adminis-
trator passwords are set
Either the User or the Administrator password is required for booting the system as well
as for entering the Setup menu.
If the User password is entered here, limited access to the Setup is granted. Entering the
Administrator password provides full access to all Setup entries.
