Kontron AM4904, User Manual

Page: 77 / 135

Operating the Unit
59 AM4904 User Guide
www.kontron.com
3.3.23 Miscellaneous Commands
3.4 System Configuration Tools
A number of tools and applications is supplied to support configuring, using, diagnosing and installing the
board. All tools are accessible from the Linux shell.
3.4.1 Accessing the PLD: pldtool
Tool for reading and writing to the PLD glue logic.
# pldtool
usage: pldtool <options> <command>
Options:
-? display help and exit
Commands:
list list all PLD regs
read <reg 1> ... <reg N> read one or more PLD register
write <reg> <value> write a value to one PLD reg
mask <reg> <mask> <compare_value> compares the register with the mask
dump <reg> <count> hex dump of multiple memory
spidump dump SPI eeprom content
spiinit write file to user SPI eeprom
spiverify verify file to factory (0) or user (1) SPI eeprom
#
3.4.2 Accessing Switch Management: fpcli
This command opens the FASTPATH CLI shell.
Log in as admin and enter privileged mode by typing ’ enable ’ (no passwords required by default).Exit it by
entering either V or X.
Table 3-25: CLI Miscellaneous Commands
Command Description
cooling show Show cooling information
alarm show {info | capability [<FRU-ID]} Show information about alarm module or capabilities
help [command] Show help for command prefix or all commands
sleep <SECONDS> Let the CM sleep for the desired time
config show [<config option>] Show configuration settings
support info Show board information for technical support
quit Quit the CLI session