Kontron AM4904, User Manual

Page: 72 / 135

Operating the Unit
54 AM4904 User Guide
www.kontron.com
3.3.9 I2C Commands
3.3.10 LAN Commands
3.3.11 Log Commands
Each internal module can be instrumented to provide debug log output. This output includes warnings,
major and critical errors. In addition, for debugging/support purposes, special trace enabled CM versions
can provide detailed output for debugging purposes.
The log commands provide configuration access to the level of output generated.
Table 3-11: CLI I2C Commands
Command Description
i2c read <CONTROLLER> <I2CSLAVE> <BYTES> Read from I2C slave
i2c write <CONTROLLER> <I2CSLAVE> {<BYTES>...} Write to I2C slave
i2c wrrd <CONTROLLER> <I2CSLAVE> <BYTES-TO-READ} {<BYTES>...} Write/Read to I2C slave
Table 3-12: CLI LAN Commands
Command Description
lan clear stats <FRU-ID> <CHANNEL> Clear LAN statistics
lan show <FRU-ID> <CHANNEL>
Show LAN settings of FRU device
lan show raw <FRU-ID> <CHANNEL> Show LAN settings of FRU device in RAW format
lan show stats <FRU-ID> <CHANNEL> Show LAN statistics
Table 3-13: CLI Log Commands
Command Description
log level <MODULE>
{debug | trace | minor | major | critical |
none}
Toggle internal tracing output verbosity
for specified MODULE
log level all
{debug | trace | minor | major | critical | none}
Toggle internal tracing output verbosity
for all modules
log target
{none | console | syslog}
Set target for internal tracing
log show Show internal tracing output verbosity