manualshive.com logo in svg

Kontron AM4904, User Manual

Share
Download
Kontron AM4904 User Manual Download Page 2

ii

AM4904 User Guide

www.kontron.com

Revision History

Customer Service

Visit our site at:

www.kontron.com

 

© 2011 Kontron, an International Corporation. All rights reserved.

The information in this user's guide is provided for reference only. Kontron does not assume any liability
arising out of the application or use of the information or products described herein. This user's guide may
contain or reference information and products protected by copyrights or patents and does not convey any
license under the patent rights of Kontron, nor the rights of others.

Kontron is a registered trademark of Kontron. All trademarks, registered trademarks, and trade names used
in this user's guide are the property of their respective owners. All rights reserved. Printed in Canada. This
user's guide contains information proprietary to Kontron. Customers may reprint and use this user's guide
in other publications. Customers may alter this user's guide and publish it only after they remove the Kon-
tron name, cover, and logo.

Kontron reserves the right to make changes without notice in product or component design as warranted by
evolution in user needs or progress in engineering or manufacturing technology. Changes that affect the
operation of the unit will be documented in the next revision of this user's guide.

Rev. Index

Brief Description of Changes

Date of Issue

0.1

Initial Issue

3 July, 2009

0.2

Included PCIe and sRIO variants, minor edits

16 September, 2009

1.0

Major edits in all chapters

14 July, 2010

1.1

Minor edits in all chapters

6 April, 2011

1.2

Minor edits in chapter 3 „Operating the Unit“

14 April, 2011

Contact Information: 

Kontron Canada, Inc. 

4555 Ambroise-Lafortune
Boisbriand, Québec, Canada 
J7H 0A4
Tel:

(450) 437-5682
 (800) 354-4223 

Fax: (450) 

437-8053

E-mail: 

[email protected] 

Kontron Modular Computer GMBH 

Sudetenstrasse 7 
87600 Kaufbeuren 
Germany 
+49 (0) 8341 803 333

 +49 (0) 8341 803 339 

[email protected] 

Summary of Contents for AM4904








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands