Kontron AM4904, User Manual

Page: 73 / 135

Operating the Unit
55 AM4904 User Guide
www.kontron.com
3.3.12 MC Commands
The mc commands provide access to the management controllers of all intelligent/manages units installed.
3.3.13 Memory Commands
The memory commands provide access to memory usage information.
3.3.14 Monitor Commands
The monitor commands provide access to monitoring functionality for IPMI messages, either on IPMB-L,
IPMB-0 or RMCP.
Table 3-14: CLI MC Commands
Command Description
mc show <FRU-ID> Show management controller information of FRU device
mc reset warm <FRU-ID> Invoke warm reset of management controller of FRU device
mc reset cold <FRU-ID> Invoke cold reset of management controller of FRU device
mc led {presence | link-status} Configure MCH front panel LEDs
mc carrier number Shows currently used Carrier Number
Table 3-15: CLI Memory Commands
Command Description
memory stats show Show current memory allocation statistics
Table 3-16: CLI Monitor Commands
Command Description
monitor file <FILE> Set name of file FILE where IPMB traffic is written to
monitor file size <SIZE> Limit IPMB log file to size SIZE
monitor file keep <NUM> When IPMB file size is reached, rotate files and keep NUM files
monitor file enable Enable logging of IPMB traffic to file
monitor file disable Disable logging of IPMB traffic to file
monitor console enable Enable logging of IPMB traffic to serial console
monitor console disable Disable logging of IPMB traffic to serial console
monitor show Show setting of IPMB traffic logging
monitor i2c trace console enable Enable tracing of I2C events (to console only)
monitor i2c trace console disable Disable tracing of I2C events (to console only)
monitor ip <IP> Set IP address of target host where IPMB traffic is written to
monitor ip enable Enable logging of IPMB traffic to IP address
monitor ip disable Disable logging of IPMB traffic to IP address