Kontron AM4904, User Manual

Page: 124 / 135

A-4 AM4904 User Guide
www.kontron.com
ipmi_disable_rr 0
Disable round robin scheduling of requests on IPMB-0 (to
PM, OEM, CU, FAN modules)
ipmi_t6_timeout_ms 220 Timeout for ipmi t6 period
local_sensor_loop_time 10 Refresh all local sensors every configured seconds
max_local_sensor_valid_time 20 Timeout for sensor valid flag in seconds
mcmc_fru_data_file
/etc/fru-
data-
mcmc.bin
Data file for MCMC FRU data
mcmc_fru_data_size 8192 MCMC FRU data size
nios_lm73_test 0 NIOS LM73 test routine
nios_loopback_bi_test 0 NIOS bi-directional loopback test routine
nios_loopback_test 0 NIOS loopback test routine
nios_loopback_test_c1 0 NIOS loopback test routine
nios_loopback_test_c2 0 NIOS loopback test routine
nios_par_memory_test 0 NIOS parallel memory test routine
nvctable_save_file
/etc/
nvctable.
save
Data file for non-volatile data storage
om6060_mp_dis_3v_ctrl N/A
register value to write to TPS2359 when disabling 3A/3B
channel in OM6060
om6060_mp_en_3v_ctrl N/A
register value to write to TPS2359 when enabling 3A/3B
channel in OM6060
om6060_pp_dis_12v_ctrl N/A
register value to write to TPS2359 when disabling 12A/12B
channel in OM6060
om6060_pp_en_12v_ctrl N/A
register value to write to TPS2359 when enabling 12A/12B
channel in OM6060
pcie_activate 0
0 = do not take S1301 / T3 out of reset if present, 1 = do
assume S1301 is installed, take S1301 / T3 out of reset and
execute init sequence
pcie_always_reset 0
1 = always reset PCIE switch when MCMC/CM starts, 0 = skip
PCIE initialization if PCIE is not in reset, 2=reset PCIe switch
if root complex setting pcie_rc_site, pcie_i2c_config_enable
or SSC setting changed
pcie_i2c_config_enable 0
0=normal initialization sequence for PLX
1=initial configuration through I2C. PLX will not start auto-
matically, but will wait for configuration release through
register 0x3AC. See PLX datasheet for details.
pcie_init_early.N n/a
PCIE initialization sequence executed before T3 is taken out
of reset. There are a number of I2C initialization sequences
executed during startup and before the PCIE T3 is taken out
of reset. srio_init_early.N contains CLI commands to be exe-
cuted during initialization. This can be mainly the I2C com-
mands.
Table A-1: CM configuration file settings (Continued)
Setting Default Description