Kontron AM4904, User Manual

Page: 29 / 135

Functional Description
11 AM4904 User Guide
www.kontron.com
Module sensors that have been implemented are listed in the sensor list below.
Table 2-1: Sensor List AM4904-Base
Sensor
ID
SENSOR Name Sensor Type Code Description
0 Kontron CM MC Device Loc. Only readable as CM
1 Kontron MCMC MC Device Loc. Only readable as MCMC
2 Kontron MCMC FRU Device Loc. Only readable as CM
3
Specified by Telco Alarm
module
FRU Device Loc.
Only readable as CM and when Telco alarm
module is detected
4 Health Error 24h (Platform Alert)
The sensor is an aggregation of analog
sensors and shows the healthy state of
the module. If the sensor is asserted the
Health LED lit on amber.
5 Board Reset CFh (OEM Kontron Reset)
Generates an event when CPU is released
from reset. The reset type and reset
source is encode in the event data
6 FW Ver Change 2Bh (Version Change)
Generates an event when firmware
changed occurred.
7 FRU0 Reconfig 12h (System Event)
Generates when the changes configura-
tion,
8 SEL State
10h (Event Logging Dis-
able)
Generates an event for SEL fill state
9 ModuleHotSwap F2h (Module Hot Swap) Refer to AMC.0 specification.
10 IPMB0 Link State
F1h (PICMG Physical IPMB-
0) see PICMG 3.0R2.0 section 3.8.4.2 for
event trigger and sensor definition
11 PLL Status D5h OEM (PLL Status)
Generates an event when PLL status
changes.
The sensor only returns valid values when
payload is activated.
12 IPMI Watchdog 23h (Watchdog 2)
Generates event when IPMI watchdog
bites. For closer information refer to IPMI
v1.5 specification.
13 T1_0x90_Temp 01h (Temperature)
For thresholds, see “Sensor Thresholds”
on page 14
14 T1_0x40_V_3V3 02h (Voltage)
15 T1_0x40_Temp 01h (Temperature)
16 T1_0x40_V_12V 02h (Voltage)
17 T1_0x48_V_1V8 02h (Voltage)
18 T1_0x48_Temp 01h (Temperature)
19 T1_0x4C_V_1V25 02h (Voltage)
20 T1_0x4C_Temp 01h (Temperature)
21 T2_0x54_V_1V8 02h (Voltage)
22 T2_0x54_Temp 01h (Temperature)
23 T2_0x5C_V_1V2 02h (Voltage)
24 T2_0x5C_Temp 01h (Temperature)