KONIG+NEURATH TALO.S Konferenz, Assembly Instructions Manual

Page: 42 / 48

39
No. Description Remedy
36 Plug detection in
M1 motor socket
Plug in the correct motor to the
motor socket that shows the error.
Reset all motors.
37 Plug detection in
M2 motor socket
38 Plug detection in
M3 motor socket
61 Actuator changed
55 Synchronization lost
motor group 1
Remove load from desktop.
Reset all motors,
if error occurs after reset again,
contact the customer service.
56 Synchronization lost
motor group 2
67 High voltage Unplug power cord and
contact the costumer service.
81 Internal error Make a manual reset.
Unplug power cord and plug it in
again after a few seconds.
If this error occurs frequently,
unplug the power cord and contact
the customer service.