KONIG+NEURATH TALO.S Konferenz, Assembly Instructions Manual

Page: 33 / 48

30
Area of application
The TALO.S conference tables with motorized height adjust -
ment are not suitable for use in the workshop or warehouse,
not in wet areas/damp conditions.
Transport
Do not transport the desk in a vertical position!
Do not store the desk in a vertical position!
Please do not carry or lift the desk by the desk top but by
the frame. Do not drag the desk top along the floor, not
even on carpet as it could be damaged.
Getting started
Make sure the desk has been set up correctly, that the plug
to the control panel is inserted firmly and that the cables from
your office equipment and the computer are in the appropriate
trays. Connect the desk to the mains. Initialise (manual reset)
the desk as described on page 36.
Please follow the safety instructions on
page 31 - 33.