KONIG+NEURATH TALO.S Konferenz, Assembly Instructions Manual

Page: 34 / 48

31
Safety instructions
Failure to follow the instructions marked with a
warning symbol can lead to accidents with serious
personal injury. Please read the following safety
instructions carefully. It is crucial that any person
installing or using the system has the necessary
information and has access to the user instructions.
Before starting
Make sure the desk has been properly assembled.
Make sure the voltage to the control panel is correct
before connecting the system to the mains. The indivi -
dual parts must be connected to the control box before
it is connected to the mains.
During operation
If the control box makes any unusual noises or emits
odours, pull the mains plug immediately. Make sure the
cables have not been damaged.
If the power cord is damaged, it must be replaced by
the manufacturer or its customer service or a similarly
qualified person in order to avoid a hazard.
Before uninstalling or troubleshooting
Stop the electrically - operated desk! Switch off the po -
wer supply and pull the mains plug! Remove any load
from the desk!